Cat HM316 Mulcher (bite limiter): specs & which machines can run it

Forestry Mulcher rated for 31–33 GPM. Good fit on 2 of the 64 loaders we track.

Specs

Type: Forestry Mulchers
Flow class: high
Min flow: 31 GPM
Max flow: 33 GPM
Min pressure: 2900 PSI
Max pressure: 4061 PSI
Min HP: not published
Max HP: not published
Width: not published
Weight: 3053 lb

Maker-listed compatible machines: 246D3, 262D3, 272D3, 272D3 XE, 279D3, 289D3, 299D3, 299D3 XE

Source: https://www.petersoncat.com/sites/default/files/products/documents/-113626.pdf (official doc (Cat AEHQ8447) hosted by dealer Peterson Cat)

Placeholder · affiliate link

Affiliate / “get a quote” link for Cat HM316 Mulcher (bite limiter) goes here. No affiliate program is connected yet.

Placeholder · featured partner slot

Featured maker / dealer slot — Cat dealers. Reserved for a future paid placement. No partner has been signed. This box is intentionally empty.

Verify with your dealer. Results come from published specs and our matching rules. They are not a guarantee. Coupler type, case-drain line, electrical connectors, auxiliary options, relief settings and model year all matter. Confirm with the dealer and the attachment maker before you buy or run anything.

Machines that can run the Cat HM316 Mulcher (bite limiter)

2 good fit30 marginal32 won't run

Good fit
Cat 299D3 (high flow) · details
32 GPM is inside the 31-33 GPM range. 4061 PSI is within the head's pressure rating.
Good fit
Cat 299D3 XE (high flow)
32 GPM is inside the 31-33 GPM range. 4061 PSI is within the head's pressure rating.
Marginal
ASV RT-75 (high flow)
35.7 GPM is above the 33 GPM maximum (up to 15%) - needs flow limiting; risk of heat/overspeed. 3300 PSI is within the head's pressure rating. Head weighs 3053 lb, more than the 2750 lb rated operating capacity.
Marginal
Bobcat S650 (high flow)
30.5 GPM is up to 10% below the 31 GPM minimum - expect reduced speed/power. 3500 PSI is within the head's pressure rating. Head weighs 3053 lb, more than the 2690 lb rated operating capacity.
Marginal
Bobcat S76-2 (high flow)
30.3 GPM is up to 10% below the 31 GPM minimum - expect reduced speed/power. 3500 PSI is within the head's pressure rating. Head weighs 3053 lb, more than the 2900 lb rated operating capacity.
Marginal
Bobcat S770 (high flow)
36.6 GPM is above the 33 GPM maximum (up to 15%) - needs flow limiting; risk of heat/overspeed. 3500 PSI is within the head's pressure rating.
Marginal
Bobcat S86-2 (high flow)
36.6 GPM is above the 33 GPM maximum (up to 15%) - needs flow limiting; risk of heat/overspeed. 4061 PSI is within the head's pressure rating.
Marginal
Bobcat T596 (standard flow)
Flow data missing - cannot confirm.
Marginal
Bobcat T650 (high flow)
30.5 GPM is up to 10% below the 31 GPM minimum - expect reduced speed/power. 3500 PSI is within the head's pressure rating. Head weighs 3053 lb, more than the 2500 lb rated operating capacity.
Marginal
Bobcat T76-2 (high flow)
30.3 GPM is up to 10% below the 31 GPM minimum - expect reduced speed/power. 3500 PSI is within the head's pressure rating. Head weighs 3053 lb, more than the 2900 lb rated operating capacity.
Marginal
Bobcat T770 (high flow)
36.6 GPM is above the 33 GPM maximum (up to 15%) - needs flow limiting; risk of heat/overspeed. 3500 PSI is within the head's pressure rating.
Marginal
Bobcat T86-2 (high flow)
36.6 GPM is above the 33 GPM maximum (up to 15%) - needs flow limiting; risk of heat/overspeed. 4061 PSI is within the head's pressure rating.
Marginal
CASE TR270B (high flow)
32.4 GPM is inside the 31-33 GPM range. Head weighs 3053 lb, more than the 1890 lb rated operating capacity.
Marginal
CASE TR310B (high flow)
32.4 GPM is inside the 31-33 GPM range. Head weighs 3053 lb, more than the 2170 lb rated operating capacity.
Marginal
CASE TR340B (high flow)
37.6 GPM is above the 33 GPM maximum (up to 15%) - needs flow limiting; risk of heat/overspeed. 4000 PSI is within the head's pressure rating. Head weighs 3053 lb, more than the 2380 lb rated operating capacity.
Marginal
CASE TV370B (high flow)
37.6 GPM is above the 33 GPM maximum (up to 15%) - needs flow limiting; risk of heat/overspeed. Head weighs 3053 lb, more than the 2590 lb rated operating capacity.
Marginal
Cat 259D3 (high flow)
30 GPM is up to 10% below the 31 GPM minimum - expect reduced speed/power. 3336 PSI is within the head's pressure rating. Head weighs 3053 lb, more than the 2010 lb rated operating capacity.
Marginal
Cat 279D3 (high flow)
32 GPM is inside the 31-33 GPM range. 4061 PSI is within the head's pressure rating. Head weighs 3053 lb, more than the 2220 lb rated operating capacity.
Marginal
Cat 289D3 (high flow)
32 GPM is inside the 31-33 GPM range. 4061 PSI is within the head's pressure rating. Head weighs 3053 lb, more than the 2890 lb rated operating capacity.
Marginal
John Deere 325G (high flow)
32 GPM is inside the 31-33 GPM range. 3450 PSI is within the head's pressure rating. Head weighs 3053 lb, more than the 2590 lb rated operating capacity.
Marginal
John Deere 331G (high flow)
36.5 GPM is above the 33 GPM maximum (up to 15%) - needs flow limiting; risk of heat/overspeed. 3450 PSI is within the head's pressure rating.
Marginal
Kubota SVL75-3 (high flow)
29.8 GPM is up to 10% below the 31 GPM minimum - expect reduced speed/power. 3185 PSI is within the head's pressure rating. Head weighs 3053 lb, more than the 2490 lb rated operating capacity.
Marginal
New Holland C327 (high flow)
32.4 GPM is inside the 31-33 GPM range. Head weighs 3053 lb, more than the 2700 lb rated operating capacity.
Marginal
New Holland C332 (high flow)
37.6 GPM is above the 33 GPM maximum (up to 15%) - needs flow limiting; risk of heat/overspeed.
Marginal
New Holland C334 (high flow)
37.6 GPM is above the 33 GPM maximum (up to 15%) - needs flow limiting; risk of heat/overspeed.
Marginal
New Holland C337 (high flow)
37.6 GPM is above the 33 GPM maximum (up to 15%) - needs flow limiting; risk of heat/overspeed.
Marginal
New Holland L318 (high flow)
30.7 GPM is up to 10% below the 31 GPM minimum - expect reduced speed/power. Head weighs 3053 lb, more than the 1800 lb rated operating capacity.
Marginal
New Holland L320 (high flow)
30.7 GPM is up to 10% below the 31 GPM minimum - expect reduced speed/power. Head weighs 3053 lb, more than the 2000 lb rated operating capacity.
Marginal
New Holland L321 (high flow)
33.2 GPM is above the 33 GPM maximum (up to 15%) - needs flow limiting; risk of heat/overspeed. Head weighs 3053 lb, more than the 2100 lb rated operating capacity.
Marginal
New Holland L328 (high flow)
37.6 GPM is above the 33 GPM maximum (up to 15%) - needs flow limiting; risk of heat/overspeed. Head weighs 3053 lb, more than the 2800 lb rated operating capacity.
Marginal
Takeuchi TL10V2 (high flow)
32.8 GPM is inside the 31-33 GPM range. Head weighs 3053 lb, more than the 2525 lb rated operating capacity.
Marginal
Takeuchi TL8R2 (high flow)
33.8 GPM is above the 33 GPM maximum (up to 15%) - needs flow limiting; risk of heat/overspeed. Head weighs 3053 lb, more than the 2115 lb rated operating capacity.
Won't run
ASV RT-135 (standard flow)
20 GPM is well below the 31 GPM minimum. 3300 PSI is within the head's pressure rating.
Won't run
ASV RT-135 Forestry (standard flow)
20 GPM is well below the 31 GPM minimum. 3300 PSI is within the head's pressure rating.
Won't run
ASV RT-50 (standard flow)
13.3 GPM is well below the 31 GPM minimum. 3000 PSI is within the head's pressure rating. Head weighs 3053 lb, more than the 1400 lb rated operating capacity.
Won't run
ASV RT-65 (standard flow)
21.4 GPM is well below the 31 GPM minimum. 3771 PSI is within the head's pressure rating. Head weighs 3053 lb, more than the 2000 lb rated operating capacity.
Won't run
ASV VT-100 (standard flow)
23 GPM is well below the 31 GPM minimum. 3481 PSI is within the head's pressure rating.
Won't run
ASV VT-75 (standard flow)
21.4 GPM is well below the 31 GPM minimum. Head weighs 3053 lb, more than the 2300 lb rated operating capacity.
Won't run
ASV VT-80 (standard flow)
24.7 GPM is well below the 31 GPM minimum. 3771 PSI is within the head's pressure rating. Head weighs 3053 lb, more than the 2800 lb rated operating capacity.
Won't run
Bobcat S450 (standard flow)
16.7 GPM is well below the 31 GPM minimum. 3300 PSI is within the head's pressure rating. Head weighs 3053 lb, more than the 1370 lb rated operating capacity.
Won't run
Bobcat S590 (standard flow)
17.1 GPM is well below the 31 GPM minimum. 3500 PSI is within the head's pressure rating. Head weighs 3053 lb, more than the 2000 lb rated operating capacity.
Won't run
Bobcat S64-2 (standard flow)
17.6 GPM is well below the 31 GPM minimum. 3500 PSI is within the head's pressure rating. Head weighs 3053 lb, more than the 2300 lb rated operating capacity.
Won't run
Bobcat S66-2 (standard flow)
17.6 GPM is well below the 31 GPM minimum. 3500 PSI is within the head's pressure rating. Head weighs 3053 lb, more than the 2400 lb rated operating capacity.
Won't run
Bobcat S70 (standard flow)
8.9 GPM is well below the 31 GPM minimum. 2000 PSI is below the 2900 PSI the head is rated for - less torque. Head weighs 3053 lb, more than the 760 lb rated operating capacity.
Won't run
Bobcat T450 (standard flow)
16.7 GPM is well below the 31 GPM minimum. 3300 PSI is within the head's pressure rating. Head weighs 3053 lb, more than the 1490 lb rated operating capacity.
Won't run
Bobcat T595 (standard flow)
17.1 GPM is well below the 31 GPM minimum. 3500 PSI is within the head's pressure rating. Head weighs 3053 lb, more than the 2100 lb rated operating capacity.
Won't run
Bobcat T64-2 (standard flow)
17.6 GPM is well below the 31 GPM minimum. 3500 PSI is within the head's pressure rating. Head weighs 3053 lb, more than the 2300 lb rated operating capacity.
Won't run
Bobcat T66-2 (standard flow)
17.6 GPM is well below the 31 GPM minimum. 3500 PSI is within the head's pressure rating. Head weighs 3053 lb, more than the 2400 lb rated operating capacity.
Won't run
CASE TV450B (standard flow)
24.2 GPM is well below the 31 GPM minimum.
Won't run
CASE TV620B (standard flow)
24.2 GPM is well below the 31 GPM minimum.
Won't run
Cat 239D3 (standard flow)
18 GPM is well below the 31 GPM minimum. 3336 PSI is within the head's pressure rating. Head weighs 3053 lb, more than the 1530 lb rated operating capacity.
Won't run
Cat 249D3 (standard flow)
18 GPM is well below the 31 GPM minimum. 3336 PSI is within the head's pressure rating. Head weighs 3053 lb, more than the 1740 lb rated operating capacity.
Won't run
John Deere 317G (standard flow)
17 GPM is well below the 31 GPM minimum. 3450 PSI is within the head's pressure rating. Head weighs 3053 lb, more than the 2125 lb rated operating capacity.
Won't run
John Deere 333G (standard flow)
25 GPM is well below the 31 GPM minimum. 3450 PSI is within the head's pressure rating.
Won't run
Kubota SVL65-2 (standard flow)
17.4 GPM is well below the 31 GPM minimum. 3263 PSI is within the head's pressure rating. Head weighs 3053 lb, more than the 2100 lb rated operating capacity.
Won't run
Kubota SVL97-2 (standard flow)
23.1 GPM is well below the 31 GPM minimum. 3553 PSI is within the head's pressure rating.
Won't run
New Holland C345 (standard flow)
24.2 GPM is well below the 31 GPM minimum. 3450 PSI is within the head's pressure rating.
Won't run
New Holland C362 (standard flow)
24.2 GPM is well below the 31 GPM minimum. 3450 PSI is within the head's pressure rating.
Won't run
New Holland L316 (standard flow)
18.4 GPM is well below the 31 GPM minimum. 3046 PSI is within the head's pressure rating. Head weighs 3053 lb, more than the 1600 lb rated operating capacity.
Won't run
New Holland L334 (standard flow)
24.2 GPM is well below the 31 GPM minimum. 3450 PSI is within the head's pressure rating.
Won't run
Takeuchi TL11R3 (standard flow)
23.1 GPM is well below the 31 GPM minimum. 3481 PSI is within the head's pressure rating. Head weighs 3053 lb, more than the 2735 lb rated operating capacity.
Won't run
Takeuchi TL12R2 (standard flow)
23.3 GPM is well below the 31 GPM minimum. 3481 PSI is within the head's pressure rating. Head weighs 3053 lb, more than the 2975 lb rated operating capacity.
Won't run
Takeuchi TL12V2 (standard flow)
23.2 GPM is well below the 31 GPM minimum. 3481 PSI is within the head's pressure rating.
Won't run
Takeuchi TL6R (standard flow)
17.7 GPM is well below the 31 GPM minimum. 2988 PSI is within the head's pressure rating. Head weighs 3053 lb, more than the 1840 lb rated operating capacity.